Skip to main content

Setting up devices

In this section:

When you have received your Clinical Storage Monitoring device and want to start using the device for monitoring, do the following:

  1. Secure the device outside the storage unit.

    Note

    We recommend attaching the device to a surface such as the side of the fridge using the provided Saga Device Box. For more information, see Assembling the Saga Device Box.

    Note

    We recommend ensuring the device display is visible.

  2. Connect the USB cable on the device to a power source using the provided power cable.

  3. Place the temperature probe into the storage unit.

    Note

    To help ensure consistent and accurate temperature measurements, please ensure the following:

    • Probe is in the center of the storage unit.

    • Probe does not touch any of the following:

      • walls of the storage unit

      • shelves in the storage unit

      • product being stored

    Tip

    You may need to use tape to secure the probe cable.